How to Use Super VPN: Complete Setup and Connection

SuperVPN is designed to make connecting to a VPN fairly straightforward. If you have just installed the app and are not sure what to do next, you usually only need to choose a server and tap the connect button.

The first time you connect, your device may ask for permission to create a VPN connection. Accept the request, and SuperVPN can start routing your internet traffic through the VPN connection.

The exact interface can vary slightly depending on the SuperVPN version and device you are using, but the basic process is similar.

This guide explains how I would set up and use SuperVPN, including choosing a location, connecting and disconnecting, using split routing, and dealing with the most common connection problems.

Install Super VPN on Your Device

Before using SuperVPN, you need to install the appropriate version for your device.

For Android, download the app from a trusted source and complete the installation. If you are installing an APK manually, make sure you are getting it from a source you trust rather than a random APK website.

Once installation is complete, open SuperVPN.

On supported platforms, SuperVPN is also available for iPhone, Windows, and other devices, although the interface and setup process can differ slightly between platforms.

After opening the app, you should see the main connection screen.

How to Connect Super VPN

This is the part most new users are looking for.

  1. Step 1: Open SuperVPN

    Launch the SuperVPN app and wait for the main screen to load.

  2. Step 2: Choose a Server

    If the app allows you to select a location before connecting, open the server or location list.

    You may see recommended locations as well as a larger list of available regions. The best choice depends on what you are trying to do.

    For everyday browsing, I normally start with a nearby location because a closer server can often provide a more responsive connection.

    If you specifically need an IP address from another country, select the relevant location instead.

  3. Step 3: Tap Connect

    Once you have selected your location, tap the main Connect or On button.

    The first time you do this, Android or iOS may display a VPN permission request. Select OK, Allow, or Accept, depending on the wording shown on your device.

    After a few seconds, the app should show that the VPN connection is active.

  4. Step 4: Check Your Connection

    Once connected, open a website or app that you normally use.

    You can also check whether your IP address has changed by using an IP-checking website.

    If everything is working normally, you can simply leave SuperVPN connected while you use the internet.

How to Choose the Best SuperVPN Server

Choosing a server is more important than it first appears.

If your main goal is everyday browsing, I would generally choose a location that is geographically close to you. A nearby server can reduce the distance your traffic needs to travel.

For example, someone in Southeast Asia may get a more responsive connection from a nearby Asian location than from a server on the other side of the world.

However, location is not the only factor. Server load, your own internet connection, routing, and the service or website you are accessing can all affect performance.

If one location feels slow, disconnect and try another.

SuperVPN's own setup instructions recommend selecting a location from its recommended or full location list before connecting.

How to Change Your SuperVPN Location

You do not necessarily need to disconnect permanently just because you want to use another server.

Open the location list inside SuperVPN and select another region.

Depending on the version, you may need to disconnect first and then reconnect after changing the location.

A simple approach is:

Disconnect → Select another location → Connect again

If the new server is noticeably slower, try another nearby location.

This is especially useful when a particular server is overloaded or when a website is having trouble with the current IP address.

How to Disconnect SuperVPN

When you no longer need the VPN connection, open SuperVPN and tap the main connection button again.

The status should change from connected to disconnected.

You do not normally need to restart your phone after disconnecting.

I also recommend checking the status before using services that depend on your normal network connection. Some websites, banking services, games, or local apps can behave differently when your IP address changes.

What Is Smart Proxy in SuperVPN?

Some versions of SuperVPN include a Smart Proxy feature.

This can be useful if you do not want every application on your phone to use the VPN.

Instead of routing everything through SuperVPN, you can select specific applications that should use the VPN connection while other apps continue using your normal network.

For example, you might want one particular application to use the VPN while keeping local apps connected directly.

SuperVPN's help documentation describes Smart Proxy as a way to select which apps use the VPN while other applications continue using the local network.

The exact menu name and available options can vary between versions, so check the routing or proxy settings inside your app.

Global Mode vs. Split Mode

Some SuperVPN versions also provide different routing modes.

Global Mode sends your general traffic through the VPN.

Split Mode allows you to use the VPN for selected traffic while other services use your regular connection.

This can be useful when you only need a VPN for a particular website or application.

For example, if you want to keep local services running through your normal connection while routing another application through the VPN, split routing may be more convenient.

SuperVPN's current FAQ describes Global Mode as routing everything through the VPN, while Split Mode is intended to send selected traffic through the VPN.

SuperVPN Connected but Internet Not Working

This is one of the most frustrating problems because the app may say Connected while websites refuse to load.

Before changing complicated settings, I would check the basics first.

Check your normal internet connection

Disconnect SuperVPN and test your Wi-Fi or mobile data.

If the internet is already unstable without the VPN, SuperVPN is probably not the main problem.

Try another server

Disconnect and select another location.

A different server can sometimes solve connection or routing problems.

Check battery restrictions

Some Android phones aggressively restrict background activity.

SuperVPN specifically recommends disabling battery optimization for the app if internet access stops working after establishing a VPN connection.

The exact menu depends on your phone manufacturer. Look under settings such as:

Settings → Battery → Battery Optimization

Then find SuperVPN and allow it to run normally in the background.

Check Smart Proxy

If you are using Smart Proxy, make sure the application you want to access is actually included in the selected apps.

Otherwise, that app may continue using your normal connection.

SuperVPN Is Slow: What Should You Do?

A VPN can sometimes reduce connection speed because your traffic takes an additional route through a VPN server.

If SuperVPN feels unusually slow, try these steps:

  1. Disconnect and reconnect.
  2. Choose a closer server.
  3. Try another server in the same region.
  4. Test Wi-Fi versus mobile data.
  5. Close bandwidth-heavy apps running in the background.
  6. Check your internet speed without the VPN.

If your normal connection is already slow, changing VPN servers will not necessarily solve the underlying problem.

I usually test the connection without the VPN first. If the original connection is fast but one particular VPN location is slow, switching locations is the next thing I would try.

Why Can't I Accept the VPN Permission?

During the first connection, your phone may display a VPN permission dialog.

If you cannot press Allow or Accept, check whether another application is displaying an overlay on top of the screen.

Some Android security restrictions can prevent VPN permission dialogs from being accepted when another app is drawing over the screen. SuperVPN's FAQ specifically mentions applications that change screen colors or use floating windows as a possible cause.

Try temporarily closing:

  • Screen filter apps
  • Floating window tools
  • Screen overlay applications
  • Some accessibility or display utilities

Then open SuperVPN and try connecting again.

How to Use SuperVPN on Windows

The Windows version follows essentially the same idea as the mobile application.

Install SuperVPN on your Windows PC, open it, choose a server location, and press the main On or connection button.

The official Windows setup instructions describe the process as installing the app, selecting a server location, and connecting from the main interface.

If the Windows app cannot connect, check whether Windows Firewall or security software is interfering with the VPN application. VPN software needs permission to modify network or proxy settings, so security software can occasionally block installation or operation.

How to Use SuperVPN on iPhone

The process on iPhone is similarly simple.

Open SuperVPN, select a location if required, and tap the connection button.

When iOS asks for permission to establish a VPN connection, approve the request.

Once connected, the VPN indicator should appear in the iPhone status area depending on your iOS version and settings.

If you change servers, you may need to disconnect and reconnect to establish the new VPN route.

Should You Keep SuperVPN Connected All the Time?

That depends on how you use your device.

For public Wi-Fi, such as airports, hotels, cafés, and coworking spaces, using a VPN can provide an additional layer of protection for network traffic.

For your home connection, you may decide that you only need the VPN for specific websites, applications, or situations.

There is no single setting that is right for everyone.

If you regularly switch between local services and VPN-dependent services, split routing can be more convenient than keeping every application behind the VPN. SuperVPN also recommends VPN use when going online as part of its privacy guidance.

Quick SuperVPN Setup Checklist

If you just want the short version, this is all you need:

Install SuperVPN → Open the app → Choose a location → Tap Connect → Allow VPN permission → Check your connection.

If it does not work:

Check your internet → Try another server → Disable battery optimization → Check Smart Proxy/Split Mode → Reconnect.

For most users, there is no need to change advanced settings immediately.

Start with the default configuration and only adjust routing or server settings when you have a specific reason.

Final Thoughts

SuperVPN is relatively simple to use once the initial setup is finished. The most important part is understanding the difference between simply pressing Connect and choosing the right server or routing mode for your situation.

For normal browsing, I would start with a nearby recommended server. If the connection is slow, test another location. If only certain apps need the VPN, look at Smart Proxy or split routing rather than sending everything through the VPN.

And if SuperVPN says it is connected but nothing loads, check the underlying internet connection and Android battery restrictions before assuming the VPN itself is broken. Those are among the first troubleshooting steps recommended in SuperVPN's own help information.